# Public 3D printed parts

**URL:** https://www.gbgconnect.com/t/public-3d-printed-parts/737
**Category:** Technical Discussion
**Created:** [April 23, 2022, 5:39am UTC](https://www.gbgconnect.com/t/public-3d-printed-parts/737 "2022-04-23T05:39:29Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![mikey](https://avatars.discourse-cdn.com/v4/letter/m/439d5e/32.png) [@mikey](https://www.gbgconnect.com/u/mikey)
#### Post date: [April 23, 2022, 5:39am UTC](https://www.gbgconnect.com/t/public-3d-printed-parts/737/1 "2022-04-23T05:39:30Z")

</div>

Hi everyone.  
I wanted to start a discussion to share models and thoughts on 3D printed parts that may be of use.

Here in GbG israel i designed a bunch of 3D parts, some we use in all builds and some only when required.

I would love to have any feedback on my own models and also hear from you guys what you use or would love to see modeled.  
What is the most time consuming task in your build?

Parts:

> **[Audio plug holder (GoBabyGo israel) by houdini](https://www.thingiverse.com/thing:5363913)**
>
> Go baby go a non profit that fits electric cars for disabled kids.
> Designs are used to hold and connect a simple audio plug to the car dash, plug is used to connect a push button. 
> https://www.gobabygo.org.il/

> **[Connectors for Logitech adaptive gaming kit (GoBabyGo israel) by houdini](https://www.thingiverse.com/thing:4888212)**
>
> Go baby go a non profit that fits electric cars for disabled kids.
> Designs are used to connect push buttons easily to a car with a many configuration to fit the actual needs of the kids.
> Connectors are for the Logitech gaming kit push buttons.
> The...

> **[PVC hindge (GoBabyGo israel) by houdini](https://www.thingiverse.com/thing:3853387)**
>
> Go baby go a non profit that fits electric cars for disabled kids.
> Design is used to move a tray down to the kids lap in the car and up to allow easy exit and enter.
> Hinge is used to move two peaces of PCV in a 360 degree range around a center pvc...

> **[Push botton connector (GoBabyGo israel) by houdini](https://www.thingiverse.com/thing:3668860)**
>
> Go baby go a non profit that fits electric cars for disabled kids.
> Designs are used to connect push buttons easily to a car with a many configuration to fit the actual needs of the kids. 
> Bottom replacement for big and small bottoms are replacement...

Ping me if you need help printing

PS:  
We use [Logitech G Adaptive Gaming Kit for the Xbox Adaptive Controller](https://www.logitechg.com/en-us/products/gamepads/adaptive-gaming-kit-accessories.943-000318.html) for our bush buttons which have 3.5mm male mono plug.